TM 9--2350--292--20--1
0118 00--3
TURN SIGNAL FAILS TO OPERATE -- CONTINUED
0118 00
E
1. Turn MASTER switch OFF
(TM 9--2350--292--10).
2. Disconnect harness 4W127 P1 from directional
signal control.
3. Disconnect lead 461 from left front signal lamp.
4. Place one multimeter lead in harness 4W127
P1 socket B and other lead in lead 461
connector socket. Check for continuity.
Is continuity present?
CONTINUED FROM STEP C
Replace directional signal
control (WP 0267 00 or
WP 0268 00). Verify fault
is corrected.
Repair (WP 0290 00) or
replace (WP 0324 00)
harness 4W127. Verify
fault is corrected.
yes
no
no
yes
Replace directional signal
control (WP 0267 00 or
WP 0268 00). Verify
fault is corrected.
F Observe rear turn signals.
Does one or both rear turn signals operate?
CONTINUED FROM STEP C
Observe indicator flasher on directional signal
control.
Is indicator flashing?
G
no
yes
Replace directional signal
control (WP 0267 00 or
WP 0268 00). Verify fault
is corrected.
CONTINUED ON NEXT PAGE
