TM 9--2350--292--20--1
0118 00--1
TURN SIGNALS FAIL TO OPERATE.
0118 00
THIS WORK PACKAGE COVERS:
Turn Signals Fail To Operate
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Personnel Required
Two
Do both front turn signals flash?
1. Set main lighting switch to SER DRIVE position
(TM 9--2350--292--10).
2. Place turn signal lever to 4--way flasher position
(TM 9--2350--292--10).
3. Turn MASTER switch ON
(TM 9--2350--292--10).
4. Observe front turn signals.
no
yes
Go to Step C.
A
B
1. Place turn signal lever to neutral position
(TM 9--2350--292--10).
2. Press brake pedal and have assistant observe
stoplights.
Do both stoplights light?
Replace directional signal
control (WP 0267 00 or
WP 0268 00). Verify fault
is corrected.
Go to WP 0116 00.
yes
no
CONTINUED ON NEXT PAGE
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.