STOPLIGHTS FAIL TO OPERATE

STOPLIGHTS FAIL TO OPERATE (cont) - TM-9-2350-292-20-1_572

STOPLIGHTS FAIL TO OPERATE (cont) - TM-9-2350-292-20-1_574

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
529

TM 9--2350--292--20--1 0117 00--2 STOPLIGHTS FAIL TO OPERATE -- CONTINUED 0117 00 no yes Repair (WP 0290 00) or replace (WP 0314 00) harness 4W100. Verify fault is corrected. CONTINUED ON NEXT PAGE 1. Remove switch panel from bracket (WP 0242 00) and reconnect ground strap to switch panel. 2. Disconnect harness 4W105 P1 from switch panel. 3. Turn MASTER switch ON (TM 9--2350--292--10). 4. Place multimeter red lead on harness 4W105 P1 socket N and black lead to ground. Check for voltage. 5. Turn MASTER switch OFF (TM 9--2350--292--10). Is 24 V dc present? CONTINUED FROM STEP B 1. Disconnect harness 4W127 P1 from directional signal control assembly. 2. Turn MASTER switch ON and turn main light switch to STOPLIGHT position (TM 9--2350--292--10). 3. Place multimeter red lead in harness 4W127 P1 socket D and black lead to ground. Check for voltage. 4. Turn MASTER switch OFF (TM 9--2350--292--10). no yes Go to Step J. C Is 24 V dc present? D

Privacy Statement
Press Release
Contact