TM 9--2350--292--20--10117 00--3STOPLIGHTS FAIL TO OPERATE -- CONTINUED0117 00CONTINUED FROM STEP DCONTINUED ON NEXT PAGEE 1. Disconnect harness 4W151 P1 from switchS8.2. Place one multimeter lead on 4W151 J4 pin Nand other lead in harness 4W151 P1 socketF. Check for continuity.Is continuity present?noyesRepair (WP 0290 00) or replace(WP 0242 00) harness 4W151.Verify fault is corrected.noyesReplace S8 switch(WP 0242 00). Verifyfault is corrected.F1. Place one multimeter lead on switch S8receptacle pin F and other lead on pin A.Check for continuity.2. Place one multimeter lead on switch S8receptacle pin K and other lead on pin C.Check for continuity.Is continuity present at both checks?GIs continuity present at both checks?noyes1. Place one multimeter lead in harness 4W151P1 socket A and other lead on harness4W151 J4 pin D. Check for continuity.2. Place one multimeter lead in harness 4W151P1 socket K and other lead on harness4W151 J4 pin L. Check for continuity.Repair (WP 0290 00) orreplace (WP 0242 00)harness 4W151. Verifyfault is corrected.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
