STOPLIGHTS FAIL TO OPERATE (cont) - TM-9-2350-292-20-1

STOPLIGHTS FAIL TO OPERATE (cont) - TM-9-2350-292-20-1_574

STOPLIGHTS FAIL TO OPERATE (cont) - TM-9-2350-292-20-1_576

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
531

TM 9--2350--292--20--1 0117 00--4 STOPLIGHTS FAIL TO OPERATE -- CONTINUED 0117 00 CONTINUED FROM STEP G H CONTINUED ON NEXT PAGE 1. Disconnect harness 4W127 P2 from switch panel. 2. Place one multimeter lead in harness 4W151 P1 socket C and other lead on harness 4W151 J2 pin B. Check for continuity. Is continuity present? no yes Repair (WP 0290 00) or replace (WP 0242 00) harness 4W151. Verify fault is corrected. no yes Repair (WP 0290 00) or replace (WP 0317 00) harness 4W105. Verify fault is corrected. I 1. Reconnect harness 4W151 P1 to switch S8. 2. Disconnect both leads 75 and 75/16 from stoplight switch. 3. Place one multimeter lead in harness 4W105 P1 socket D and other lead in lead 75/16 connector socket. Check for continuity. 4. Place one multimeter lead in harness 4W105 P1 socket L and other lead in lead 75 connector socket. Check for continuity. Is continuity present at both checks?

Privacy Statement
Press Release
Contact