STOPLIGHTS FAIL TO OPERATE (cont) - TM-9-2350-292-20-1

STOPLIGHTS FAIL TO OPERATE (cont) - TM-9-2350-292-20-1_576

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
533

TM 9--2350--292--20--1 0117 00--6 STOPLIGHTS FAIL TO OPERATE -- CONTINUED 0117 00 L Is 24 V dc present at both checks? CONTINUED FROM STEP K no yes Repair (WP 0290 00) or replace (WP 0294 00) harness 3W142. Verify fault is corrected. M Place one multimeter lead on each stoplight assem- bly ground stud (one at a time) while holding other lead to vehicle ground. Check for continuity. Is continuity present at both checks? 1. Reconnect harness 3W142 P1 to bulkhead disconnect. 2. Remove stoplight assembly access cover (WP 0276 00). 3. Disconnect lead 22/460 and 22/461 from right and left stoplight assembly. 4. Turn MASTER switch ON (TM 9--2350--292--10). 5. Place multimeter red lead in each stoplight assembly lead connector socket (one at a time) while holding black lead to ground. Check for voltage. 6. Turn MASTER switch OFF (TM 9--2350--292--10). Replace stoplight as- sembly (WP 0276 00). Verify fault is corrected. Replace ground lead (WP 0276 00). Verify fault is corrected. yes no END OF TASK

Privacy Statement
Press Release
Contact