STOPLIGHT ASSEMBLIES FAIL TO OPERATE (cont)

STOPLIGHT ASSEMBLIES FAIL TO OPERATE (cont) - TM-9-2350-292-20-1_569

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
524

TM 9--2350--292--20--1 0116 00--2 STOPLIGHT ASSEMBLIES FAIL TO OPERATE -- CONTINUED 0116 00 no yes Repair (WP 0290 00) or replace (WP 0314 00) harness 4W100. Verify fault is corrected. no yes Go to Step H, number 3. Is 24 V dc present? 1. Disconnect harness 3W142 P1 from bulkhead disconnect. 2. Turn MASTER switch ON and turn main light switch to SER DRIVE (TM 9--2350--292--10). 3. Place multimeter red lead in harness 4W127 P4 socket D and black lead to ground. Check for voltage. 4. Turn MASTER switch OFF (TM 9--2350--292--10). B C 1. Remove switch panel from bracket (WP 0242 00) and reconnect ground strap to switch panel. 2. Disconnect harness 4W105 P1 from switch panel. 3. Turn MASTER switch ON (TM 9--2350--292--10). 4. Place multimeter red lead in harness 4W105 P1 socket N and black lead to ground. Check for voltage. 5. Turn MASTER switch OFF (TM 9--2350--292--10). Is 24 V dc present? CONTINUED ON NEXT PAGE CONTINUED FROM STEP A

Privacy Statement
Press Release
Contact