TM 9--2350--292--20--1
0116 00--1
STOPLIGHT ASSEMBLIES FAIL TO OPERATE.
0116 00
THIS WORK PACKAGE COVERS:
Stoplight Assemblies Fail To Operate
INITIAL SETUP:
Tools and Special Tools
General mechanics tool kit (item 1, WP 0717 00)
Multimeter (item 84, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Air intake grilles above battery compartment open
(TM 9--2350--292--10)
Personnel Required
Two
no
yes
Replace stoplight lamps
(WP 0276 00). Verify
fault is corrected.
Is 24 V dc present?
1. Remove left and right stoplight door
assemblies and stoplight lamps.
2. Turn MASTER switch ON and place main light
switch to SER DRIVE (TM 9--2350--292--10).
3. Place red multimeter lead on contact in
stoplight lamp holder socket and black lead to
ground. Check for voltage. (Check both
lights.)
4. Turn MASTER switch and main light switch
OFF (TM 9--2350--292--10).
A
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.
CONTINUED ON NEXT PAGE