TM 9--2350--292--20--1
SERVICE HEADLIGHTS FAIL TO OPERATE -- CONTINUED
0115 00
M 1. Disconnect connector from high beam
indicator.
2. Place one multimeter lead in harness 4W107
P1 socket H and other lead in indicator left
(facing) socket. Check for continuity.
3. Place one multimeter lead in harness 4W107
P1 socket D and other lead in other indicator
socket. Check for continuity.
Is continuity present for both checks?
CONTINUED FROM STEP L
Replace high beam indi-
cator light socket as-
sembly (WP 0249 00).
Verify fault is corrected.
Repair (WP 0290 00) or
replace (WP 0319 00)
harness 4W107. Verify
fault is corrected.
yes
no
END OF TASK
0115 00--7/8 blank
