TM 9--2350--292--20--1
0119 00--5
BLACKOUT STOPLIGHTS FAIL TO OPERATE -- CONTINUED
0119 00
no
yes
Repair (WP 0290 00) or
replace (WP 0242 00)
harness 4W151. Verify
fault is corrected.
I
J
1. Disconnect harness 4W127 P2 from switch
panel.
2. Place one multimeter lead on harness 4W151
J2 pin C and other lead in harness 4W151 P1
socket N. Check for continuity.
Is continuity present?
Is continuity present at both checks?
CONTINUED FROM STEP H
no
yes
Repair (WP 0290 00) or
replace (WP 0317 00)
harness 4W105. Verify
fault is corrected.
K Place one multimeter lead in harness 4W105 P1
socket L and other lead in lead 75 and 75/16 con-
nector socket (one at a time). Check for continu-
ity.
Is continuity present at one or both checks?
no
yes
Repair (WP 0290 00) or
replace (WP 317
) harness 4W105.
Verify fault is corrected.
1. Reconnect harness 4W151 P1 to switch S8.
2. Disconnect lead 75 and 75/16 stoplight
switch.
3. Place one multimeter lead in harness 4W105
P1 socket D and other lead in lead 75 and
75/16 connector socket (one at a time).
Check for continuity.
CONTINUED ON NEXT PAGE
