TM 9--2350--292--20--1
0138 00--2
TRANSMISSION FILTER CLOGGED INDICATOR STAYS ON -- CONTINUED
0138 00
C
Is approximately 0 ohms resistance present?
CONTINUED FROM STEP B
no
yes
1. Disconnect harness 3W143 connector P1 from
engine disconnect bracket (WP 0295 00).
2. Place one multimeter lead on harness 3W202
connector J3 pin C and other multimeter lead in
harness 3W202 transmission filter switch
connector socket A. Check for resistance.
Repair (WP 0290 00) or replace
(WP 0300 00) harness 3W202.
Verify fault is corrected.
D
Is approximately 0 ohms resistance present?
no
yes
Repair (WP 0290 00) or replace
(WP 0295 00) harness 3W143.
Verify fault is corrected.
CONTINUED ON NEXT PAGE
E
Is approximately 0 ohms resistance present?
no
yes
1. Disconnect harness 3W143 connector P2 from
bulkhead disconnect (WP 0295 00).
2. Place one multimeter lead in harness 3W143
connector P1 socket C and other multimeter
lead on harness 3W143 connector P2 pin D.
Check for resistance.
1. Disconnect harness 4W103 connector P3 from
bulkhead disconnect (WP 0316 00).
2. Disconnect harness 4W103 connector J2 from
harness 4W115 connector P3 (WP 0316 00).
3. Place one multimeter lead in harness 4W103
connector P3 socket D and other multimeter
lead in harness 4W103 connector J2 socket B.
Check for resistance.
Repair (WP 0290 00) or
replace (WP 0316 00)
harness 4W103. Verify
fault is corrected.
