TM 9--2350--292--20--1
VEHICLE PULLS TO ONE SIDE.
0154 00
THIS WORK PACKAGE COVERS:
Vehicle Pulls To One Side
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Crowbar (item 52, WP 0717 00)
Equipment Conditions
Vehicle MASTER switch OFF (TM 9--2350--292--10)
Output reduction access covers removed
(WP 0453 00)
Personnel Required
Two
Is black mark aligned with brake adjustment gage?
Apply brakes and check black adjustment mark on
brake rod to make sure it is alined with brake ad-
justment gage.
no
yes
no
yes
A
B
1. Inspect track at roadwheels 1 and 6 for
decreased angle.
2. Use a crowbar and attempt to lift each
roadwheel.
Can roadwheels be lifted?
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working on any
vehicle. Jewelry can catch on equip-
ment and cause injury, or may short
across an electrical circuit and cause
severe burns or electrical shock.
Adjust brakes (WP 0355 00 or
WP 0356 00). Verify fault is corrected.
Replace broken torsion bar(s) of
roadwheels that can be lifted (WP
0389 00). Verify fault is corrected.
no
yes
C 1. Remove engine deck (WP 0417 00), left side
air inlet tube (WP 0191 00) and subfloor plates
19 and 24 (WP 0454 00).
2. Check steering linkage for proper adjustment
and for damaged or missing parts.
Is steering in adjustment and all parts good?
Adjust steering and/or repair or
replace damaged or missing parts
(WP 0405 00). Verify fault is corrected.
Fault corrected.
FORWARD
END OF TASK
0154 00--1/2 blank
