TM 9--2350--292--20--1
0187 00--33
0187 00
PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING
LUBRICATION INSTRUCTIONS -- CONTINUED
TABLE 1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES
INCLUDING LUBRICATION INSTRUCTIONS, HOURLY OR ON--CONDITION -- CONTINUED
ITEM
NO.
NOT FULLY
MISSION
CAPABLE
IF:
PROCEDURE
LOCATION
ITEM TO
CHECK/
SERVICE
INTERVAL
HOURLY (H) OR
ON--CONDITION
(OC)
BATTERY OR
ENGINE
COMPARTMENT
NOTE
Refer to Army Oil Analysis Program
(AOAP) TB 43--0210.
Does not
pass oil
analysis.
6
25 H OR OC
Engine AOAP
Sampling
a. Park vehicle on a level surface.
b. Remove front engine deck grilles
(TM 9--2350--292--10).
c. Start engine bring to operating
temperature (TM 9--2350--292--10).
CAUTION
Any sign of
metal flakes
or other con-
taminants.
Class III
leaks.
Make sure oil sampling valve lever
is parallel to oil filter cover and that
protective cap is installed and se-
cure on sampling valve. Failure to
properly position oil sampling valve
lever and secure protective cap
may result in loss of engine oil and
equipment damage.
d. Remove protective cap (1) from
sampling valve (2) on oil filter cover (3).
Position sample collection bottle under
sampling valve (2). Lift sampling valve
control (4) and fill bottle to required level.
Install protective cap (1) on sampling valve
(2).
e. Install front engine deck grilles
(TM 9--2350--292--10).
1
4
2
3
