TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY (cont)

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY (cont) - TM-9-2350-292-20-1_902

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY (cont) - TM-9-2350-292-20-1_904

TM-9-2350-292-20-1 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
858

TM 9--2350--292--20--1 0187 00--77 0187 00 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS -- CONTINUED TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS, SEMIANNUALLY -- CONTINUED ITEM NO. NOT FULLY MISSION CAPABLE IF: PROCEDURE LOCATION ITEM TO CHECK/ SERVICE INTERVAL SEMIANNUALLY INTERIOR 2 Fire Extinguishers (Fixed) WARNING Fire extinguishers must not be dropped, struck or exposed to temperatures above +140° F (60°C). An explosion may result causing severe injury or death. NOTE A cylinder must be recharged or replaced if its weight loss ex- ceeds 10 percent of difference between full and empty marked on cylinder a. Disconnect handle actuator cable assemblies (1) from cylinders (2) (WP 0699 00). b. Operate discharge handles (1) to ensure cable does not bind. Install new seal (3) on control valves (4) and discharge handles (1). c. Remove fixed fire extinguisher cylinders (2) (WP 0703 00). Take fire extinguisher cylinders (2) to appropriate maintenance activity IAW local SOP for serviceability determination. 1 1 1 1 3 4 4 2 2 2 2 3 3 3 Cable cor- roded, seals broken or missing. Pull handle does not work. Unservice- able fire ex- tinguisher.

Privacy Statement
Press Release
Contact