TM 9--2350--292--20--1
0188 00--4
POWERPACK ASSEMBLY REPLACEMENT -- CONTINUED
0188 00
Removal--Continued
8. Remove two cotter pins (16), two headed pins (17) and brake air valve linkage (18). Discard cotter pins.
Figure 163
16
16
18
17
17
CAUTION
Do not scratch or damage saddle caps. A defective cap
may cause oil leaks after installation. Remove nicks and
burrs prior to installation.
NOTE
There are left and right output drive saddle caps and re-
tainers. The procedures are the same for both saddle
caps and retainers.
9. Remove six screws (19), six lockwashers (20), output drive saddle cap (21) and retainer (22). Discard lockwash-
ers.
10. Pry couplings (23) out of transmission assembly into reduction drives (24).
Figure 166
24
19
20
21
22
23
