TM 9--2350--292--20--1
0188 00--1
POWERPACK ASSEMBLY REPLACEMENT
0188 00
THIS WORK PACKAGE COVERS:
Removal, Inspection, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Hoisting beam (item 64, WP 0717 00)
Suitable lifting device (15,000 lbs (6,810 Kg) min cap)
Transmission parts kit (item 65, WP 0717 00)
Crowbar (item 52, WP 0717 00)
Wire--twister pliers (item 67, WP 0717 00)
Torque wrench (item 2, WP 0717 00)
Final drive sleeve tool (item 132, WP 0717 00)
Torque wrench adapter (item 127, WP 0717 00)
Materials/Parts
Nonelectrical wire (item 40, WP 0716 00)
Lockwashers (4) (item 2, WP 0718 00)
Cotter pins (2) (item 17, WP 0718 00)
Lockwashers (6) (item 12, WP 0718 00)
Self--locking nut (item 155, WP 0718 00)
Cotter pin (item 15, WP 0718 00)
Materials/Parts--Continued
Dry--cleaning solvent (item 1, WP 0716 00)
Tiedown strap (AR) (item 205, WP 0718 00)
Preformed packings (4) (item 230,
WP 0718 00)
Adhesive (item 25, WP 0716 00)
Equipment Conditions
Battery power disconnected (WP 0256 00)
APU cover assembly removed
(WP 0413 00)
Engine deck assembly removed
(WP 0417 00)
STE/ICE pulse tachometer disconnected
(WP 0695 00)
Personnel Required
Three
WARNING
Tracks must be blocked so that the vehicle will not roll out
of control. When powerpack is disconnected, vehicle is
without brakes. Failure to securely block vehicle tracks
may result in severe injury or death to personnel or equip-
ment damage.
