TM 9--2350--292--20--1
0188 00--2
POWERPACK ASSEMBLY REPLACEMENT -- CONTINUED
0188 00
Removal
NOTE
If necessary to turn propeller shaft to access screws, con-
nect battery power and turn vehicle MASTER switch to
ON position. Hold FUEL SHUTOFF switch in OFF posi-
tion and touch STARTER switch. When screws are in
position for removal, turn vehicle MASTER switch to OFF
position and disconnect battery power.
1. Cut nonelectrical wire (1) and remove from screws (2). Discard nonelectrical wire.
2. Remove four screws (2) and four flat washers (3) from power takeoff coupling (4).
3. Slide propeller shaft (5) toward bulkhead.
Figure 292
1
2
3
4
5
FORWARD
4. Remove two screws (6), two lockwashers (7) and transmission steering rod (8). Discard lockwashers.
5. Remove two screws (9), two lockwashers (10) and transmission shifting rod (11). Discard lockwashers.
Figure 194
FORWARD
6
6
7
7
8
9
9
10
10
11
