TM 9--2350--292--20--2
0649 00--6
AUXILIARY POWER UNIT WIRING HARNESS 3W711 REPLACEMENT (HATZ)
-- CONTINUED
0649 00
Installation--Continued
10. Install wire R (13), wiring harness 3W711 wire 85 (12) and diode assembly (11) to terminal of preheat solenoid (5)
with four new lockwashers (10) and nut (9).
11. Install wiring harness 3W711 wire 487 (8) to terminal of preheat solenoid (5) with two new lockwashers (7) and nut
(6).
12. Install wiring harness 3W711 wire N (4) and lead P (3) to terminal of preheat solenoid (5) with two new lockwash-
ers (2) and nut (1). Apply adhesive to all exposed terminals.
9
10
10
12
13
5
6
7
7
8
11
10
1
2
2
3
4
NOTE
FOLLOW--ON MAINTENANCE:
Install APU in vehicle (WP 0587 00)
END OF TASK