MAIN ENGINE EXHAUST OUTLET PIPES (cont)

MAIN ENGINE EXHAUST OUTLET PIPES - TM-9-2350-292-20-2_1191

FIRE EXTINGUISHER NOZZLES - TM-9-2350-292-20-2_1193

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1155

TM 9--2350--292--20--2 0667 00--45 DEEP WATER FORDING KIT -- CONTINUED 0667 00 Removal--Continued MAIN ENGINE EXHAUST OUTLET PIPES--CONTINUED 3. Remove two clamps (10), two flexible exhaust pipes (9) and two preformed packings (8) from two engine exhaust outlets (7). Discard preformed packings. 4. Install one elbow (6) on each of two exhaust outlets (7), secure with two clamps (5). 5. Install two exhaust plates (3) on top rear of engine deck (4) with eight screws (1) and eight new lockwashers (2). Figure 361 1 2 3 5 6 7 8 9 10 4 4

Privacy Statement
Press Release
Contact