Installation (cont) - TM-9-2350-292-20-2

Installation (cont) - TM-9-2350-292-20-2_1319

MAIN HYDRAULIC PUMPS SWITCH, TRANSDUCERS AND ASSOCIATED PARTS REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
1283

TM 9--2350--292--20--2 FILTER VALVE MANIFOLD TRANSDUCERS AND RELATED PARTS REPLACEMENT -- CONTINUED 0689 00 Installation--Continued 10. Install new preformed packings (7 and 8) on straight swivel adapter (3) and adapter (5). 11. Install elbow (4) and adapter (5) in hydraulic filter valve manifold (6) port MS. 12. Install straight swivel adapter (3) on transducer 4MT533 (2) then install transducer 4MT533 (2) with straight swiv- el adapter (3) on elbow (4). 13. Install wiring harness 4W503 connector P8 (1) on transducer 4MT533 (2). NOTE: FILTER VALVE MANIFOLD HOSES AND FITTINGS REMOVED FOR CLARITY 6 1 2 3 4 5 7 8 NOTE FOLLOW--ON MAINTENANCE: Calibrate new transducers (WP 0692 00) Start engine, operate main and hoist winch hydraulic controls several times to purge air from hoses (TM 9--2350--292--10) Check hydraulic system for leaks and fill hydraulic reservoir (TM 9--2350--292--10) Install floor plate #18 and #22 (WP 0454 00) END OF TASK 0689 00--7/8 blank

Privacy Statement
Press Release
Contact