TM 9--2350--292--20--2
0689 00--5
FILTER VALVE MANIFOLD TRANSDUCERS AND RELATED PARTS
REPLACEMENT -- CONTINUED
0689 00
Removal--Continued
9. Remove wiring harness 4W503 connector P13 (15) from transducer 4MT547 (16).
10. Remove transducer 4MT547 (16) with straight swivel adapter (17) from reducer (18) then remove straight swivel
adapter (17) from transducer 4MT547 (16).
11. Remove hose (19) from tee (20).
12. Remove reducer (18) and tee (20) from tee (21).
13. Remove preformed packing (22) from straight swivel adapter (17). Discard preformed packing.
14. Inspect all parts for damage and replace as required.
Installation
NOTE
Apply a thin even coat of clean lubricant to all preformed
packings prior to installation.
1. Install new preformed packing (22) on straight swivel adapter (17).
2. Install reducer (18) and tee (20) on tee (21) in hydraulic filter manifold (6) port PMO.
3. Install hose (19) on tee (20).
4. Install straight swivel adapter (17) on transducer 4MT547 (16) then install transducer 4MT547 (16) with straight
swivel adapter (17) on reducer (18).
5. Install wiring harness 4W503 connector P13 (15) on transducer 4MT547 (16).
NOTE:
FILTER VALVE MANIFOLD
HOSES AND FITTINGS
REMOVED FOR CLARITY
6
15
16
17
18
19
20
21
22