TM 9--2350--292--20--2
MECHANICAL TACHOMETER, SHAFT ASSEMBLY, PULSE TACHOMETER,
ANGLE ADAPTER, DRIVE ADAPTER AND RELATED PARTS REPLACEMENT
-- CONTINUED
0695 00
Installation--Continued
5. Connect shaft assembly (18) to coupling adapter (14) and pulse tachometer (19).
6. Install coupling adapter (9) on plate (17) with lockwasher (16) and nut (15).
7. Connect shaft assembly (13) to coupling adapter (9) and coupling adapter (14).
8. Secure shaft assembly (13) to vehicle hull with clamp (12), screw (10) and new lockwasher (11).
9. Connect shaft assembly (1) to coupling adapter (9).
10. Secure shaft assembly (1) to vehicle hull with two clamps (8), two screws (6) and two new lockwashers (7).
11. Install tachometer (2) in gauge panel (5) with two lockwashers (4) and two nuts (3).
12. Connect shaft assembly (1) to tachometer (2).
Figure 366
2
3
4
5
6
7
8
8
9
7
10
11
13
14
15
16
17
18
19
12
1
6
NOTE
FOLLOW--ON MAINTENANCE:
Install subfloor plates #19, #24 and #25 (WP 0454 00)
Install vehicular tool box rack, oddment tray assembly
and bracket (WP 0480 00)
Install gauge panel on bracket, if removed
(WP 0243 00)
Install engine deck grilles and engine deck access doors
(TM 9--2350--292--10)
END OF TASK
0695 00--3/4 blank
