TM 9--2350--292--20--2
0695 00--1
MECHANICAL TACHOMETER, SHAFT ASSEMBLY, PULSE TACHOMETER,
ANGLE ADAPTER, DRIVE ADAPTER AND RELATED PARTS
REPLACEMENT
0695 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (3) (item 13, WP 0718 00)
Preformed packing (item 249, WP 0718 00)
Lockwashers (4) (item 9, WP 0718 00)
Equipment Conditions
Engine deck grilles and engine deck access doors
removed (TM 9--2350--292--10)
Gauge panel removed from bracket (WP 0243 00)
For replacement of tachometer
Vehicular tool box rack, oddment tray assembly and
bracket removed (WP 0480 00)
Subfloor plates #19, #24 and #25 removed
(WP 0454 00)
Personnel Required
Two
Reference
TM 9--2350--292--10
Removal
1. Disconnect shaft assembly (1) from tachometer (2).
2. Remove two nuts (3), two lockwashers (4) and tachometer (2) from gauge panel (5). Retain attaching hardware
for installation.
3. Remove two screws (6), two lockwashers (7) and two clamps (8) securing shaft assembly (1) to vehicle hull. Dis-
card lockwashers.
4. Disconnect shaft assembly (1) from coupling adapter (9).
Figure 366
1
2
3
4
5
6
7
8
8
9
7
6
