TM 9--2350--292--20--2
0692 00--7
TRANSDUCER CALIBRATION -- CONTINUED
0692 00
Calibration--Continued
17. Turn RT unit circuit breaker switch (6) OFF. Power light (7) will indicate RT unit is powered off.
18. Turn vehicle MASTER switch OFF.
19. Disconnect one end of SPORT power cable (4) (part number 54418/711967) from wiring harness 4W508 (1) con-
nector P2 and other end from SPORT power connector (5).
20. Disconnect wiring harness 4W508 (1) connector P3 from SPORT 1553 data bus wire branch A (3).
21. Disconnect wiring harness 4W508 (1) connector P1 from remote terminal (RT) unit connector J6 (2).
1
2
6
3
4
5
7
NOTE
FOLLOW--ON MAINTENANCE:
Start engine, operate all hydraulic components several
times to purge air from hoses (TM 9--2350--292--10)
Check hydraulic system for leaks and fill hydraulic
reservoir (TM 9--2350--292--10)