POWER BOOST MANIFOLD AND MODULATING VALVE PLATE REPAIR (OLD CONFIGURATION)

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
136

TM 9--2350--292--20--2 0374 00--1 POWER BOOST MANIFOLD AND MODULATING VALVE PLATE REPAIR (OLD CONFIGURATION) 0374 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Torque wrench (item 2, WP 0717 00) Retaining ring pliers set (item 15, WP 0717 00) Materials/Parts Lockwashers (4) (item 35, WP 0718 00) Retaining rings (4) (item 451, WP 0718 00) Lockwashers (2) (item 2, WP 0718 00) Safety goggles (item 93, WP 0716 00) Lubricant (item 3, WP 0716 00) Equipment Conditions Vehicle parked on a level surface with tracks blocked and brakes released (TM 9--2350--292--10) Brake shaft and brake pedal return spring disconnected from modulating valve assembly (WP 0366 00) Hydraulic hoses disconnected from brake modulating valve, hydraulic brake cylinder and power boost manifold assembly (WP 0360 00) References TM 9--2350--292--10 Removal 1. Remove four screws (1), four lockwashers (2) and four flat washers (3) from plate assembly (4). Discard lock- washers. NOTE Quantity of plates may vary. Note quantity and location of plates removed to aid in installation. 2. Remove plate assembly (4) and any plates (5 and 6) that are present. FORWARD 1 2 3 1 2 3 4 5 6

Privacy Statement
Press Release
Contact