TM 9--2350--292--20--2
0374 00--3
POWER BOOST MANIFOLD AND MODULATING VALVE PLATE REPAIR (OLD
CONFIGURATION) -- CONTINUED
0374 00
Assembly
WARNING
CAUTION
Retaining rings in new bearing kits must be discarded
and replaced with retaining rings listed as mandatory re-
placement parts. Failure to comply could result in bear-
ing separation, causing equipment damage.
1. Install two bearing kits (17) on plate (14) with four new retaining rings (16).
NOTE
Shim plate as required to align with centerline of brake
hydraulic cylinder.
2. Install plate (14) and shims (13) on plate (15) with two screws (10), two new lockwashers (11) and two flat wash-
ers (12).
3. Torque two screws (10) to 30--35 lb--ft (40.7--47.5 NSm).
4. Install modulating valve assembly (8) (WP 0376 00).
5. Install brake hydraulic cylinder assembly (9) (WP 0370 00).
6. Install power boost manifold assembly (7) (WP 0378 00).
7
8
9
10
11
12
15
14
17
16
13