Disassembly - TM-9-2350-292-20-2

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
155

TM 9--2350--292--20--2 0379 00--3 BRAKE POWER BOOST HYDRAULIC MANIFOLD REPAIR (NEW CONFIGURATION) -- CONTINUED 0379 00 Disassembly 1. Remove machine plug (28) and preformed packing (29) from power boost hydraulic manifold (11). Discard pre- formed packing. 2. Remove retainer (30), preformed packing (31) and check valve (32) from power boost hydraulic manifold (11). Discard preformed packing. 3. Remove pressure relief valve (33), preformed packing (34), packing retainer (35) and preformed packing (36) from power boost hydraulic manifold (11). Discard preformed packings. 4. Remove machine plug (37) and preformed packing (38) from power boost hydraulic manifold (11). Discard pre- formed packing. 5. Inspect parts for damage and replace as required. Assembly 1. Apply a thin even coat of clean lubricant to all new preformed packings prior to installation. 2. Install machine plug (37) and new preformed packing (38) in power boost hydraulic manifold (11). 3. Install pressure relief valve (33), new preformed packing (34), packing retainer (35) and new preformed packing (36) in power boost hydraulic manifold (11). 4. Install check valve (32), retainer (30) and new preformed packing (31) in power boost hydraulic manifold (11). 5. Install machine plug (28) and new preformed packing (29) in power boost hydraulic manifold (11). 28 29 11 32 31 30 33 34 35 36 37 38

Privacy Statement
Press Release
Contact