TM 9--2350--292--20--20380 00--4BRAKE POWER BOOST HYDRAULIC MANIFOLD REPAIR (NEWCONFIGURATION WITH BRAKE MODULATION) -- CONTINUED0380 00Installation1. Apply a thin even coat of clean lubricant to all new preformed packings prior to installation.2. Install power boost hydraulic manifold (11) on plate assembly (27) with two screws (24), two new lockwashers (25)and two flat washers (26).3. Install new preformed packing (23), adapter (22), adapter (21) and pressure switch (20) on power boost hydraulicmanifold (11).4. Install pressure switch bracket (15) on support (19) with two screws (16), two new lockwashers (17) and two flatwashers (18).5. Install pressure switch (2) on pressure switch bracket (15) with two screws (12), two new lockwashers (13) andtwo flat washers (14).6. Install elbow (8) with new preformed packing (10) in power boost hydraulic manifold (11) and tee (9) in pressureswitch (2).7. Connect hose #444 (7) to tee (9) and elbow (8).8. Connect wiring harness 2W601 wire 591 (5) to pressure switch lead (6).9. Connect wiring harness 4W100 wire 48 (3) to pressure switch lead (4).10. Connect wiring harness 4W100 connector P1 (1) to pressure switch (2).345621112724252681079121314161718152322212019NOTEFOLLOW--ON MAINTENANCE:Connect hydraulic hoses to brake power boost hydraulicmanifold (WP 0362 00)Install subfloor plates #14 and #16 (WP 0454 00)Connect battery power (WP 0256 00)END OF TASK
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business