TM 9--2350--292--20--2
0381 00--2
SERVICE BRAKE PUMP AND MOTOR ASSEMBLY REPLACEMENT --
CONTINUED
0381 00
Installation
1. Install brake pump and motor assembly (2), four new grommets (6), four screws (3), four new lockwashers (4),
four flat washers (5) and wiring harness 4W110 wire GND (7) in vehicle.
2. Connect wiring harness 4W110 connector P1 (1) to brake pump and motor assembly (2).
Figure 174
1
2
7
6
5
4
3
NOTE
FOLLOW--ON MAINTENANCE:
Connect hydraulic hoses to brake pump and motor
assembly (WP 0360 00 or WP 0361 00)
Install subfloor plates #14 and #16 (WP 0454 00)
Connect battery power (WP 0256 00)
END OF TASK
