Disassembly - TM-9-2350-292-20-2

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
165

TM 9--2350--292--20--2 0382 00--3 BRAKE PEDAL AND BRACKET ASSEMBLY REPAIR (OLD CONFIGURATION) -- CONTINUED 0382 00 Disassembly 1. Remove cotter pin (24) and straight headed pin (25) from brake pedal and bracket assembly (9). Discard cotter pin. 2. Remove two screws (26), two lockwashers (27) and brake pedal assembly (28) from bracket assembly (29). Dis- card lockwashers. 3. Remove screw (30), lockwasher (31), lever (32) and woodruff key (33) from brake pedal assembly (28). Discard lockwasher. 4. Remove four screws (34), four lockwashers (35), four bearing caps (36) and support assembly (37) from brake pedal assembly (28). Discard lockwashers. 5. Remove lubrication fitting (38) from brake pedal assembly (28). WARNING 6. Remove two retaining rings (39), two flat washers (40) and two roller bearings (41) from brake pedal assembly (28). Discard retaining rings. 7. Remove screw (42), brake pedal (43) and woodruff key (44) from shaft (45). 9 27 26 25 24 29 28 37 36 38 39 40 41 36 41 40 39 45 33 32 31 30 44 36 35 34 43 34 35 36 42

Privacy Statement
Press Release
Contact