TRANSMISSION OIL SAMPLING VALVE REPLACEMENT

Installation (cont) - TM-9-2350-292-20-2_29

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
6

TM 9--2350--292--20--2 TRANSMISSION OIL SAMPLING VALVE REPLACEMENT 0346 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Sealing compound (item 16, WP 0716 00) Equipment Conditions Engine deck doors opened (TM 9--2350--292--10) References TM 9--2350--292--10 Removal 1. Remove oil sampling valve (1) from bushing (2). 2. Remove bushing (2) from transmission (3). 3. Inspect parts for damage and replace as required. Installation 1. Apply sealing compound to male pipe threads of bushing (2). 2. Install bushing (2) in transmission (3). 3. Apply sealing compound to male pipe threads of oil sampling valve (1). 4. Install oil sampling valve (1) in bushing (2). Figure 157 1 2 3 FORWARD NOTE FOLLOW--ON MAINTENANCE: Close engine deck doors (TM 9--2350--292--10) END OF TASK 0346 00--1/2 blank

Privacy Statement
Press Release
Contact