TM 9--2350--292--20--2
0420 00--2
EXHAUST DEFLECTOR ASSEMBLY REPAIR -- CONTINUED
0420 00
Disassembly
1. Remove six screws (8), six lockwashers (9), six nuts (10) and three hinges (3) from exhaust deflector assembly
(7). Discard lockwashers.
2. Remove two cotter pins (11), two pins (12), four flat washers (13) and two exhaust deflector levers (6) from ex-
haust deflector (14). Discard cotter pins.
3. Inspect parts for damage and replace as required.
Assembly
1. Install two exhaust deflector levers (6) on exhaust deflector (14) with two pins (12), four flat washers (13) and two
new cotter pins (11).
2. Install three hinges (3) on exhaust deflector assembly (7) with six screws (8), six new lockwashers (9) and six nuts
(10).
Figure 200
11
12
7
6
13
13
8
3
14
9
10