ENGINE DECK DOOR AND TORSION BAR REPAIR

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
330

TM 9--2350--292--20--2 0422 00--1 ENGINE DECK DOOR AND TORSION BAR REPAIR 0422 00 THIS WORK PACKAGE COVERS: Removal, Disassembly, Assembly, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Endless sling (item 24, WP 0717 00) Suitable lifting device (200 lbs (90.8 kg) min cap) Materials/Parts Adhesive (item 18, WP 0716 00) Solvent (item 91, WP 0716 00) Lockwashers (8) (item 2, WP 0718 00) Lockwashers (10) (item 139, WP 0718 00) Spring washers (4) (item 195, WP 0718 00) Rubber seal (item 189, WP 0718 00) Rubber seal (item 190, WP 0718 00) Rubber seal (item 191, WP 0718 00) Rubber seal (item 192, WP 0718 00) Rubber seal (item 193, WP 0718 00) Rubber seal (item 194, WP 0718 00) Equipment Conditions Boom raised to full forward position (TM 9--2350--292--10) Engine deck door opened (TM 9--2350--292--10) Personnel Required Three References TM 9--2350--292--10 Removal 1. Attach endless sling and suitable lifting device to door assembly (1), open door to approximately 62° angle. 2. Remove two screws (2), two lockwashers (3) and support (4) from engine deck (5). Discard lockwashers. 3. Remove torsion bar (6) from tube (7). FORWARD 1 DOOR REMOVED FOR CLARITY 2 6 3 4 5 7

Privacy Statement
Press Release
Contact