TM 9--2350--292--20--2
0439 00--4
AUXILIARY POWER UNIT DOOR, FAN ASSEMBLY AND HOLD--OPEN LATCH
REPLACEMENT (HATZ) -- CONTINUED
0439 00
Removal--Continued
9. Remove two cotter pins (26), latch assembly (27), spring (28) and pin (29). Discard cotter pins.
10. Remove screw (30), flat washer (31) and pin assembly (32) from bracket (33).
11. Remove four screws (34), four flat washers (35), four lockwashers (36) and bracket (33) from hull.
12. Inspect all parts for damage and replace as required.
Installation
1. Install bracket (33) on hull with four screws (34), four new lockwashers (36) and four flat washers (35).
2. Install pin assembly (32) to bracket (33) with screw (30) and flat washer (31).
3. Install pin (29), spring (28) and latch assembly (27) to bracket (33).
4. Install two new cotter pins (26) in pin (29) to secure latch assembly (27).
26
32
29
33
36
35
34
28
27
31
30
