TM 9--2350--292--20--2
0442 00--2
ARMOR SKIRT PANEL HINGE, STANDOFF AND STOP REPLACEMENT --
CONTINUED
0442 00
NOTE
Perform Removal steps 1, 3 and 7 and Installation steps
4, 7 and 8 for maintenance of panels #1 and #8 outside
hinges and lifting eyes.
Perform Removal steps 2, 3 and 7 and Installation steps
4, 5 and 6 for maintenance of panels #2 through #7 out-
side hinges and lifting eyes.
Perform Removal steps 4 and 7 and Installation step 3
for maintenance of inside hinges.
Perform Removal steps 5 and 7 and Installation step 2
for maintenance of standoffs.
Perform Removal steps 6 and 7 and Installation step 1
for maintenance of stops.
Removal
1. Remove six nuts (1), six lockwashers (2), six screws (3), six flat washers (4), outside hinge (5) and shims (6).
Discard lockwashers.
2. Remove 12 nuts (7), 12 lockwashers (8), 12 screws (9), 12 flat washers (10), two hinges (11) and shims (12).
Discard lockwashers.
3. Remove cotter pin (13), nut (14), two flat washers (15), lifting eye (16), screw (17) and flat washer (18). Discard
cotter pin.
Figure 219
1
2
6
5
4
3
1
2
3
4
5
6
7
8
9
10
11
12
8
17
18
15
16
1514
13
7