TM 9--2350--292--20--2
0442 00--4
ARMOR SKIRT PANEL HINGE, STANDOFF AND STOP REPLACEMENT --
CONTINUED
0442 00
Installation--Continued
4. Install lifting eye (16) with screw (17), flat washer (18), two flat washers (15), nut (14) and new cotter pin (13).
5. Install two outside hinges (11) with shims (12), 12 screws (9), 12 flat washers (10), 12 new lockwashers (8) and
12 nuts (7). Do not tighten screws.
6. Ensure that hinge pins turn freely, torque screws (9) to 95--110 lb--ft (129--149 NSm).
7. Install outside hinge (5) with shims (6), six screws (3), six flat washers (4), six new lockwashers (2) and six nuts
(1). Do not tighten screws.
8. Ensure that hinge pins turn freely, torque screws (3) to 95--110 lb--ft (129--149 NSm).
Figure 219
1
2
6
5
4
3
1
2
3
4
5
6
7
8
9
10
11
12
8
17
18
15
16
1514
13
7
NOTE
FOLLOW--ON MAINTENANCE:
Install or close armor skirt panels
(TM 9--2350--292--10)
END OF TASK