TM 9--2350--292--20--2
0457 00--5
COMMANDER’S AND PERSONNEL SEAT REPAIR -- CONTINUED
0457 00
Assembly
1. Install retainer (51) in carriage assembly (31).
2. Connect two springs (61) to retainer (51).
3. Position base assembly (62) in arm assembly (57). Install headless pin (60) through base assembly (62), arm
assembly (57) and ends of springs (61), secure headless pin (60) with new cotter pins (59).
4. Align mounting holes of base assembly (62) and arm assembly (48). Install headless pin (60) and two new cotter
pins (59).
5. Position sector assembly (58) in arm assembly (48). Install arm assembly (48) and sector assembly (58) in car-
riage assembly (31) with headless pin (56) and two new cotter pins (55).
6. Install arm assembly (57) in carriage assembly (31) with headless pin (56) and two new cotter pins (55).
7. Install release arm (50) in carriage assembly (31) with headless pin (54) and two new cotter pins (53). Connect
two springs (49) to retainer (51) and release arm (50).
8. Install knob (52) on release arm (50).
9. Install collar (47) and spring (46) on arm assembly (48) and insert handle (45) and new knurled straight pin (44).
Figure 234
45
48
46
44
47
52
50
58
49
59
59
60
62
60
59
59
55
56
55
56
55
55
61
57
31
51
54
53
53
