Removal - TM-9-2350-292-20-2

RETAINING STRAPS ASSEMBLY, ACETYLENE COMPARTMENT DOOR HARDWARE AND ASSOCIATED PARTS REPAIR

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
491

TM 9--2350--292--20--2 0464 00--2 RETAINING STRAPS ASSEMBLY, ACETYLENE COMPARTMENT DOOR HARDWARE AND ASSOCIATED PARTS REPAIR -- CONTINUED 0464 00 Removal--Continued 2. Remove thumbscrew (4). 3. Remove four screws (5), four lockwashers (6), four flat washers (7) and two hose retainers (8) from side of acety- lene compartment (9). Discard lockwashers. 4. Remove two cotter pins (10), two nuts (11), two flat washers (12), two latches (13) and two handles (14) from acetylene compartment door (15). Discard cotter pin. 5. Remove screw (16), lockwasher (17) and bolt cutter clamp (18) from acetylene compartment door (15). Discard lockwasher. 6. Remove two rubber strips (19) and two rubber strips (20) from acetylene compartment door (15), if damage. Dis- card rubber strips. 7. Remove three screws (21), three lockwashers (22) and hose rack (23) from side of acetylene compartment (9). Discard lockwashers. WARNING 8. Clean rubber strips (19 and 20) mounting surface on acetylene compartment door (15) with dry--cleaning solvent. Figure 240 9 4 10 11 12 23 22 21 13 19 20 20 8 5 7 6 6 18 19 16 14 17 15 7 5

Privacy Statement
Press Release
Contact