TM 9--2350--292--20--2
0464 00--3
RETAINING STRAPS ASSEMBLY, ACETYLENE COMPARTMENT DOOR
HARDWARE AND ASSOCIATED PARTS REPAIR -- CONTINUED
0464 00
Disassembly
1. Remove two screws (24), two lockwashers (25) and plate (26) from bracket (27). Discard lockwashers.
2. Inspect parts for damage and replace as required.
Assembly
Install plate (26) on bracket (27) with two screws (24) and two new lockwashers (25). Do not tighten screws.
Installation
1. Install hose rack (23) on side of acetylene compartment (9) with three screws (21) and three new lockwashers
(22).
2. Apply rubber based adhesive to two new rubber strips (19) and two new rubber strips (20), if removed.
3. Install two new rubber strips (19) and two new rubber strips (20) on acetylene compartment door (15), if removed.
4. Install bolt cutter clamp (18) on acetylene compartment door (15) with screw (16) and new lockwasher (17).
5. Install two handles (14) and two latches (13) on acetylene compartment door (15) with two flat washers (12), two
nuts (11) and two new cotter pins (10).
6. Install two hose retainers (8) on side of acetylene compartment (9) with four screws (5), four new lockwashers (6)
and four flat washers (7).
7. Install thumbscrew (4).
Figure 240
9
4
10
11
12
27
23
22
21
13
25
19
20
20
8
5
7
6
6
18
19
16
14
24
26
17
15
7
5
8
