Removal (cont) - TM-9-2350-292-20-2

INTERIOR STOWAGE BASKETS AND SUPPORTS REPLACEMENT

Installation (cont) - TM-9-2350-292-20-2_528

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
495

TM 9--2350--292--20--2 0465 00--2 INTERIOR STOWAGE BASKETS AND SUPPORTS REPLACEMENT -- CONTINUED 0465 00 Removal--Continued NOTE Note quantity and position of flat washer(s) being re- moved to ensure flat washer(s) are installed in the same position. 4. Remove two nuts (11), two lockwashers (12), flat washers (13) and two screws (14) from interior basket support (15). Discard lockwashers. 5. Remove interior basket support (15) from floor support (16). 6. Remove nut (17), lockwasher (18), flat washer (19) and screw (20) from interior basket support (21). Discard lockwasher. 7. Remove interior basket support (21) from floor support (22). 8. Inspect parts for damage and replace as required. Installation 1. Install interior stowage basket support (21) on floor support (22) with screw (20), flat washer (19), new lockwasher (18) and nut (17). 2. Install interior stowage basket support (15) on floor support (16) with two screws (14), flat washers (13), two new lockwashers (12) and two nuts (11). Figure 241 11 11 12 12 13 13 14 14 15 16 17 18 19 20 21 22 13

Privacy Statement
Press Release
Contact