TM 9--2350--292--20--2
PASSIVE NIGHT VIEWER STOWAGE BOX ASSEMBLY AND MOUNTING
BRACKET REPLACEMENT
0468 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (8) (item 2, WP 0718 00)
Equipment Conditions
Passive night viewer removed (TM 9--2350--292--10)
References
TM 9--2350--292--10
Removal
1. Remove four screws (1), four lockwashers (2) and passive night viewer stowage box assembly (3) from mounting
bracket (4). Discard lockwashers.
NOTE
Note position of flat washers being removed to ensure
flat washers are installed in the same position.
2. Remove four screws (5), four lockwashers (6), four flat washers (7) and mounting bracket (4) from hoist winch
cable chute (8). Discard lockwashers.
3. Inspect parts for damage and replace as required.
Installation
1. Install mounting bracket (4) on hoist winch cable chute (8) with four screws (5), four new lockwashers (6) and four
flat washers (7).
2. Install passive night viewer stowage box assembly (3) on mounting bracket (4) with four screws (1) and four new
lockwashers (2).
Figure 242
1
8
6
5
7
3
2
4
NOTE
FOLLOW--ON MAINTENANCE:
Install passive night viewer
(TM 9--2350--292--10)
END OF TASK
0468 00--1/2 blank
