TM 9--2350--292--20--2
0493 00--1
HOIST WINCH WIRE ROPE ASSEMBLY REPLACEMENT
0493 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit
(item 1, WP 0717 00)
Materials/Parts
Gloves (item 23, WP 0716 00)
Equipment Conditions
Hoist winch cable access cover opened
(TM 9--2350--292--10)
Wire rope removed from boom and 35--ton hook block
rigging (TM 9--2350--292--10)
Hoist winch wire rope payed out
(TM 9--2350--292--10)
References
TM 9--2350--292--10
WARNING
Gloves should be worn when working with wire rope to
prevent cuts and abrasions.
Removal
1. Open wire rope access door (1) to gain access to hoist winch drum (2).
2. Loosen two screws (3) securing end of wire rope (4) in hoist winch drum (2).
3. Remove wire rope (4) from hoist winch drum (2) and vehicle.
4. Inspect parts for damage and replace as required.
Figure 257
1
2
3
4
FORWARD
