TM 9--2350--292--20--2
0494 00--2
HOIST WINCH WIRE ROPE ROLLER AND BEARING HOUSING ASSEMBLY
REPAIR-- CONTINUED
0494 00
Disassembly
1. Remove two bearings (5) from housing (6).
2. Remove two lubrication fittings (7) from housing (6).
3. Inspect parts for damage and replace as required.
Assembly
NOTE
Ensure lubrication hole in the bearing is aligned with the
lubrication fitting to allow proper lubrication.
1. Install two bearings (5) in housing (6).
2. Install two lubrication fittings (7) in housing (6).
Figure 260
5
7
5
6
7
