TM 9--2350--292--20--2
0495 00--1
HOIST WINCH WIRE ROPE SHIELD REPLACEMENT
0495 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (35) (item 2, WP 0718 00)
Equipment Conditions
Commander’s seat removed (WP 0457 00)
Hoist winch wire rope removed (WP 0493 00)
Dome light removed (WP 0283 00)
Liquid container brackets removed (WP 0474 00)
PTO/accessory panel removed (WP 0245 00)
Passive night viewer stowage box assembly and
mounting bracket removed (WP 0468 00)
Equipment Conditions--Continued
Hand grenade boxes removed
(WP 0466 00)
Wiring harness 4W136, 4W153 and lead assembly
4W140 removed from hoist winch wire rope shield
(WP 0325 00, WP 0328 00 and WP 0326 00)
Ceiling and bulkhead rifle clips removed (WP 0481 00)
Personnel Required
Two
Removal
1. Remove 10 screws (1) and 10 lockwashers (2) securing top shield (3). Discard lockwashers.
2. Remove nine screws (4), nine lockwashers (5) and nine flat washers (6) securing bottom shield (7). Discard lock-
washers.
3. Remove assembled shields (3, 7 and 8) to rear of crew compartment.
Figure 260
FORWARD
3
4
5
6
7
8
1
2
