HOIST WINCH HOSE ASSEMBLIES, FITTINGS, ADAPTERS AND MANIFOLDS REPLACEMENT

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
549

TM 9--2350--292--20--2 0496 00--1 HOIST WINCH HOSE ASSEMBLIES, FITTINGS, ADAPTERS AND MANIFOLDS REPLACEMENT 0496 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Materials/Parts Safety goggles (item 93, WP 0716 00) Wiping rags (item 7, WP 0716 00) Plastic bags (AR) (item 48, WP 0716 00) Marker tags (AR) (item 49, WP 0716 00) Sealing compound (item 16, WP 0716 00) Lubricant (item 51, WP 0716 00) Preformed packings (2) (item 455, WP 0718 00) Preformed packing (item 456, WP 0718 00) Dust protective plug (AR) (item 14, WP 0716 00) Dust protective cap (AR) (item 44, WP 0716 00) Preformed packings (2) (item 457, WP 0718 00) Equipment Conditions Subfloor plates #15, #18, #22 and #27 removed (WP 0454 00) Hydraulic system pressure discharged (WP 0545 00) Hoist winch hydraulic lines disconnected (WP 0579 00) Removal WARNING WARNING WARNING Hydraulic system pressure is rated at 4450 psi. Do not torque hydraulic fittings or perform removal procedures when hydraulic system is pressurized. Discharging sys- tem pressure before performing any maintenance proce- dures will avoid injury to personnel. Eye protection will be worn when performing mainte- nance procedures on all hydraulic components to avoid injury to personnel.

Privacy Statement
Press Release
Contact