TM 9--2350--292--20--2
0497 00--3
MAIN WINCH AND SPADE ASSEMBLY REPLACEMENT -- CONTINUED
0497 00
Removal--Continued
WARNING
Verify spade lock is in place before removing lower
mounting screws. Personnel could be injured or killed if
spade should fall.
NOTE
Lengths of screws will vary. Note locations of screws dur-
ing removal to aid during installation.
7. Remove 21 screws (10) and 21 flat washers (11) from lower portion of front hull cover (3).
8. Remove 15 screws (12) and 15 flat washers (13) (remove positions marked A and B last) from upper portion of
front hull cover (3).
Figure 270
3
12
13
11
10
A
B
