MAIN WINCH AND SPADE ASSEMBLY REPLACEMENT

Installation (cont) - TM-9-2350-292-20-2_584

TM-9-2350-292-20-2 Recovery Vehicle Heavy Full-Tracked: M88A2 (NSN 2350-01-390-4683) (EIC:ACQ) Manual
Page Navigation
552

TM 9--2350--292--20--2 0497 00--1 MAIN WINCH AND SPADE ASSEMBLY REPLACEMENT 0497 00 THIS WORK PACKAGE COVERS: Removal, Installation INITIAL SETUP: Tools and Special Tools General mechanic’s tool kit (item 1, WP 0717 00) Torque wrench (item 9, WP 0717 00) Heavy--duty lifting chain (Item 72, WP 0717 00) Suitable lifting device (12,000 lbs (5448 kg) min cap) Materials/Parts Dry--cleaning solvent (item 1, WP 0716 00) Pressure sensitive tape (item 41, WP 0716 00) Sealing compound (item 42, WP 0716 00) Lubricant (item 3, WP 0716 00) Lockwashers (6) (item 9, WP 0718 00) Equipment Conditions Subfloor plates #9, #10 and #12 removed (WP 0454 00) Auxiliary winch removed (WP 0513 00) Spade lowered (TM 9--2350--292--10) Personnel Required Three References TM 9--2350--292--10 Removal NOTE The front hull cover screws behind the spade (in the locked position) require that the spade be lowered to al- low screw removal and then raised to the lock position. 1. Remove eight screws (1) and eight flat washers (2) from front hull cover (3). WARNING 2. Raise spade to locked position (TM 9--2350--292--10), disconnect nine hydraulic quick--disconnect couplings (4) from main winch and spade assembly (5). Figure 270 1 2 3 4 5 4

Privacy Statement
Press Release
Contact