TM 9--2350--292--20--20510 00--6SPADE ASSEMBLY LUBRICATION HOSES, TUBES, FITTINGS ANDADAPTER BLOCK REPLACEMENT -- CONTINUED0510 00Installation--Continued13. Connect four tubes (8) to four straight adapters (9) at spade cylinder link pivot points (5) in hull cover plate assem-bly (10).14. Install two pipe couplings (2) in adapter block (3).15. Install one hose (1) and six clamps (7) with two screws (6).16. Connect two hoses (1) to two fitting assemblies (4) at spade cylinder link pivot points (5).17. Connect two hoses (1) to pipe couplings (2) at adapter block (3).18. Lubricate spade assembly in accordance with WP 0187 00.Figure 2801132124589981066177ONE SCREWAND TWO CLAMPSOPPOSITE SIDE(NOT SHOWN)NOTEFOLLOW--ON MAINTENANCE:Install main winch and spade assembly (WP 0497 00)END OF TASK
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business