TM 9--2350--292--20--2
0512 00--1
SPADE UPPER AND LOWER STOPS REPLACEMENT
0512 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Lockwashers (4) (item 12, WP 0718 00)
Adhesive (item 29, WP 0716 00)
Equipment Conditions
Spade lowered for upper stops
(TM 9--2350--292--10)
Spade raised for lower stops
(TM 9--2350--292--10)
References
TM 9--2350--292--10
NOTE
Perform Removal steps 1 and 3 and Installation steps 2
and 3 for maintenance of upper stops. This task replaces
only one upper stop.
Perform Removal steps 2 and 3 and Installation step 1 for
maintenance of lower stops. This task replaces only one
lower stop.
Removal
NOTE
Note the quantity and position of shim(s) being removed
to ensure shim(s) are installed in the same position.
1. Remove two screws (1), two lockwashers (2), upper stop (3) and shim(s) (4) from front hull cover assembly (5).
Discard lockwashers.
2. Remove two screws (6), lower stop (7) and shim(s) (8) from front hull cover assembly (5).
3. Inspect parts for damage and replace as required.
Figure 270
1
2
3
4
6
7
8
5
NOTE:
SPADE REMOVED FOR CLARITY
