TM 9--2350--292--20--2
0514 00--1
AUXILIARY WINCH HOSES AND FITTINGS REPLACEMENT
0514 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Tools and Special Tools
General mechanic’s tool kit (item 1, WP 0717 00)
Materials/Parts
Preformed packing (item 74, WP 0718 00)
Preformed packing (item 43, WP 0718 00)
Preformed packings (2) (item 431, WP 0718 00)
Preformed packings (6) (item 432, WP 0718 00)
Preformed packings (6) (item 433, WP 0718 00)
Equipment Conditions
Boom in stowed position
(TM 9--2350--292--10)
Spade in stowed position
(TM 9--2350--292--10)
Auxiliary winch cover removed
(WP 0513 00)
References
TM 9--2350--292--10
Removal
WARNING
WARNING
The hydraulic system is rated 4450 psi. Do not torque or
remove hydraulic lines or fittings when system is pressur-
ized. Failure to comply could result in death or injury to
personnel due to hydraulic fluid under high pressure be-
ing released.
NOTE
Cap all hydraulic lines, and plug all hydraulic ports to pre-
vent contamination. Place a suitable container under
connections to catch spillage.
1. Disconnect coupling half (1) and hydraulic hose assembly 39A (2) from coupling half (3).
2. Remove hydraulic hose assembly 39A (2) and preformed packing (4) from adapter (5). Discard preformed pack-
ing.
3. Remove coupling half (1) and preformed packing (6) from adapter (7). Discard preformed packing.
